Hot Oil Temperature Control System (ETC Series)
راه حل های بهینه و آماده برای صنعت
High-Temperature Control
The CTC series hot oil temperature control systems are designed and manufactured for a wide spectrum of high-temperature applications (ranging from 120°C to 260°C). In these systems, the oil flow operates in a closed circuit with low pressure, high flow rates, and comes into contact with electric heaters to achieve optimal heat transfer within the flow.
The primary advantages of these systems are precision, device safety, and long heater lifespan.
Technical Specifications
- Capacity: 25 to 110 kilowatts and higher
- Temperature range: up to 260 degrees Celsius
- Working pressure: 1-2 bar
- Element material: 304 stainless steel
- Temperature accuracy: ±1 Celsius
- Equipped with a user-friendly interface with a schematic panel and system performance indicators
- Centrifugal pump
- 380 volts, 3 phase
Features
- Equipped with a thermostat capable of operating in PID mode and performing advanced settings to achieve high temperature accuracy
- Equipped with a thyristor, which, while achieving more precise temperature control, also significantly increases the life of the heaters
- Equipped with protective devices including a safety thermostat and pressure switch to increase device safety
- High pressure and temperature mechanical seal
- Double heater system
- Complete insulation of piping and heater chambers
- Operational system testing before transportation
Advantages
- Operates at low pressure, which increases safety and extends the life of equipment, especially connections
- Operates at high temperatures, increasing thermal power
- Easy maintenance and repair
- High safety due to the use of quality heaters, protective modules, and operation at low pressure
- High-power standard heaters made of 304 stainless steel
- Quick and easy user interface
- Intelligent control
- Standard parts
Specifications
| Model | CTC108 | CTC48 | CTC24 |
Technical Specifications | Heat Capacity | 108 | 48 | 24 |
Pump Motor (kW) | 2.2 | 1.5 | 1.5 | |
Capacity (kg/h) | 250-350 | 150-250 | 100-150 | |
Operating Temperature (°C) | 120-250 | |||
Operating Pressure (bar) | 1-2 | |||
Operating System | 380 volts, 3-phase | |||
ابعاد تقریبی | W | 1 | 0.9 | 0.8 |
D | 2 | 8/1 | 1.5 | |
H | 1.75 | 1.55 | 1.2 | |
Customization:
- Complete calculation and design of the system for high thermal powers
- Use of more advanced applications and remote monitoring
- Capability to equip the control system with PLC and HMI
- Possibility of designing and implementing the piping and insulation system for the consumer
- Equipping the system with a parallel water cooling system (shell and tube type heat exchanger) This equipment is especially recommended for control at low temperatures
Our Innovations
Similar Products
Certainly! TSPtech provides optimal and unique designs for various transfer systems suitable for horizontal and vertical materials. These systems are tailored to the capacity and type of process. We specialize in manufacturing, implementation, and consultation. Read More
Certainly! TSPtech provides optimal and unique designs for various transfer systems suitable for horizontal and vertical materials. These systems are tailored to the capacity and type of process. We specialize in manufacturing, implementation, and consultation.
All the systems we offer are intelligent and engineered for ease of use by our expert engineers. Read More
These equipment, through dust filtration, capture suspended particles and harmful fumes generated during the production and manufacturing process. They not only preserve and improve the quality of the workplace air and enhance safety but also, whenever possible, recycle valuable dust back into the production cycle, significantly increasing production efficiency. Based on the usage type and industrial unit conditions, we design, manufacture, and implement the best dust collection system. Read More
The FG series Pulverizer by TSPtech are used for powdering semi-hard, brittle, and impact-resistant materials in processes that require a powdered product. These mills are specifically designed to handle materials that need to be converted into powder form. Read More
Material dosing systems are used to increase accuracy, reduce labor hours, and overall improve efficiency. We work in the fields of continuous and discontinuous gravitational dosing. It is also possible to implement weighing systems alongside our own transfer systems.
TSPtech with several years of experience in the field of design, construction, and implementation of various dust collection systems, air filtration, and ventilation in industrial factories, provides comprehensive and efficient solutions for industrial ventilation. We achieve high efficiency and low energy consumption coefficients using state-of-the-art equipment. Read More
EN 
FA